LuxLibre

LuxLibre › Lights › EDCO Prism › Pictures

EDCO Prism: pictures

Renders and animations made from the design files. Nothing here is a photo: the light has not been built yet. The renders are made by edco_prism_render.py, the animations by hardware/tools/edco_anim.py.

Animations

The beam stepping through the colours of the firmware’s list: white turbo, red, green, blue, yellow, cyan, magenta, white from the three colours, amber prism_colours.gif	EDCO PrismM coming apart into its parts and back prism_exploded.gif
EDCO PrismM turning about its axis while the beam steps through its colours prism_turntable.gif

Renders

Prism colours prism_colours.png	Exploded view of EDCO PrismM prism_exploded.png
EDCO Prism and EDCO Mini-16 prism_family.png	Front: the quad optic over the white, red, green and blue LEDs prism_front.png
EDCO PrismM, black anodised: crenellated bezel, finned head, the RGB-lit stainless button, a split ring through the tail tab prism_hero.png	EDCO Prism without magnets, natural anodising prism_hero_natural.png
Tail of the M version: two magnets in the tab’s end prism_m_tail.png	Underneath: the waterproof USB-C socket in its pocket prism_port.png
Half section of EDCO PrismM prism_section.png	Tail: the keyring tab with a split ring prism_tail.png

This site is open source. Improve this page.